Description
Sub Arc Welding Benefits
・High efficiency provides:
・Low weld cost
・Shorten lead time
・Easy operation for less labor cost
・Repeatible and consistent quality provides:
・Reduce rework possibility
・Shorten lead time
・Process traits provides:
・No arc light, no dust
・High melt rate, no splash, less grinding and less waste
Features
- Power Source Full Range Protection
- Overheat protection
- Overcurrent protection
- Overvoltage protection
- Undervoltage protection
- Phase detection protection
- Thermal protection
- Controller operation simple and intuitive
- Digital display
- Weld current, voltage, speed can be preset
- Touch sense makes arc start easier
- Flashback time
- Laser pointer
- Arc start success upto 100%
Technical specifications
| Power Source | ||||
| Model | ZD5-630E | ZD5-1000E | ZD5-1250E | ZD5-1600E |
| Control | Thyristor | |||
| Primary voltage | AC380V 3phases | |||
| Input power frequency (Hz) | 50 | |||
| Input power (kVA) | 43 | 69 | 89 | 112 |
| Rated output current (A) | 630 | 1000 | 1250 | 1600 |
| Rated output voltage (V) | 44 | |||
| Duty cycle (%) | 100 | |||
| No-load voltage(V) | 72 | 74 | 75 | 75 |
| Output current(A) | 100-630 | 200-1000 | 200-1250 | 300-1600 |
| Output voltage(V) | 24-44 | 28-44 | 30-44 | 32-44 |
| Shield class | IP21S | |||
| Insulated grade | 200℃ | |||
| Cooling method | Forced air | |||
| Overall (mm) | L840×W570×H860 | L880×W590×H925 | L880×W590×H925 | L980×W670×H1060 |
| Weight(kg) | 260 | 310 | 330 | 460 |
| Four Wheel Tractor | |||
| Model | MZC-630F10 | MZC-1250F19 | MZC-1600F10 |
| Wire diameter(mm) | 2.0/2.4/3.2/4.0 | 2.4/3.2/4.0/4.8 | 3.2/4.0/4.8/6.4 |
| Arc start | Touch, scratch | ||
| Weld speed（m/h） | 9-75 | ||
| Wire feed speed（m/h） | 30-300 | 20-200 | 16-160 |
| Torch adjust stroke(mm) | 100×120(Vertical×Horizontal) | ||
| Head rotate | 360° | ||
| Torch left-right angle | 45° | ||
| Torch front-back angle | 45° | ||
| Flux capacity（L） | 8 | ||
| Wire capacity（kg） | 25 | ||
| Overall dimension(mm) | 900×520×850 | ||
| Net weight（kg） | 68 | ||
| Three Wheel Tractor | |
| Model | MZC-1250L12 |
| Wire(mm) | 2.4/3.2/4.0/4.8 |
| Arc start | Touch/Scratch |
| Wire feed (m/h) | 20-200 |
| Weld speed (m/h) | 9-75 |
| Head adjust stroke(mm) | 100×120 |
| Left-right adjust | 45° |
| Flux capacity(L) | 8 |
| Wire capacity(kg) | 25 |
| Overall dimension (mm) | L1055×W390×H670 |
| Net weight (kg) | 52 |
