Description
- Ultra-compact & lightweight -The 6.8 kg light weight unit gives improved handling and set-up.
- Strong drawbar pull -16 kg magnetic force assures a stable motion.
- Solid structure -Maintenance free aluminum die cast body makes it lighter and durable.
- High speed operation -Maximum speed of 1500 mm/min can achieve high-speed welding
- Low center of gravity design - Low center of gravity gives constant motion.
- High clearance - It can run over weld beads easily.
- Easy data input - Tack information is digitally input and stored to ensure repeatability. Data is input by distance not time to ensure same welding length at different speed. It can include arc stable timer, crater time and crater fill distance in the parameters.
- Digital display - Digital display shows actual parameters or welding speed.
Features
Benefits & Features:
- Easy to assemble
- Light weight (6.8 kilograms)
- Increased productivity
- Reduction of heat input
Technical specifications
| Model Name | WEL-HANDY MULTI II (Tack)
|
|||
| Machine Weight | Standard Magnet
Model: 6.9 kg Strong Magnet Model: 7.5 kg |
|||
| Machine Dimension(W×D×H) |
277mm(W)×255mm(D)×264(H)
|
|||
| Traction Force | 16kg | |||
| Gap(F.L. ~ Bace Board) | 6mm | |||
| Magnet
Up and Down Mechanism |
Magnet Lever | |||
| Driving Method | 4-Wheel Driving Rubber Roller (Chain Transmission) | |||
| Magnet-type | Permanent Magnet | |||
| Traverse Speed | 50～1500mm/min | |||
| Tracing Method | Guide Roller (being pushed against Vertical plates) | |||
| Applied Posture | Standard Magnet Model: Horizontal position Fillet
Welding Strong Magnet Model: Vertical position Fillet Welding |
|||
|
Torch |
Torch Angle | 40°～55° | ||
| Up and down | 45mm | |||
| Forward
and Backward |
45mm | |||
| Forward
and Angle |
5° Angle at both Forward / Backward | |||
|
Automatic Stop Function |
Limit
Switch (equipped at both sides of Carriage at FL +20 mm height) |
|||
| Fine
Adjustment of Carriage Position |
Included | |||
| Non-Welded Portion | Approximately 270
mm (in total at both Start and End point) |
|||
| Power Cable | Y-Branch Cable (Power and Signal cable
Integrated) ● Carriage ~ Branch: 6 m, ● Branch ~ Power: 10 m, ● Branch ~ Wire Feeder: 0.5 m (with matching Panasonic-type Connector) ※ Please consult when using welding machine other than Panasonic. |
|||
|
Welding Torch |
Straight WHM (C) - 350S & 500S | |||
| Curved 350A & 500A | ||||
|
Torch Hold Diameter |
Straight Torch Holder: φ20 mm | |||
| Curved Torch Holder: φ16~20 mm Diameter | ||||
| Moter | DC Motor with Encoder | |||
| Input Power | AC100～240Ｖ 50/60Ｈｚ | |||
