本文へ移動

LD-R Positioner Series

Description

KOIKE LD-R Series is a small positioner excellent for general use. The LD-60R, LD-150R, LD-300R has a wider range of rotation speed with the dedicated controller LDR-B and DC motor. Futhermore, with the thorough noise-cancellation, any welding method is possible(High frequency TIG).
LD-600R uses table rotation and electronic inclined shaft through alternating current electric motor and inverter control. In addition, table can be rotated right or left without switching operation by using the 2-pedal foot switch.

Features

  • An extremely wide range of rotation speed from low to high.
  • Thorough noise cancellation and also compatible with high-frequency TIG
  • Excellent grounding power collection even when brushless
  • LD-600R uses electric model on a table inclined shift.

Technical specifications

LD-R Positioner Series

Model
LD-60R
LD-150R
LD-300R
LD-600R
Maximum horizontal load
60kg
150kg
300kg
600kg
Maximum vertical load
30kg
120kg
200kg
500kg
Table diameter
φ300mm
φ380mm
φ450mm
φ620mm
Table inclined shaft method
Manual
Electric
Tolerant inclined torque
Manual
141500 kgf/mm
During max. 
vertical load tolerant center of gravity height
150
110
150
Table -Tilt access distance
96mm
100mm
133mm
Table incline angle
-135~135°
0~90°
Table rotation speed
Max.
0.15rpm
0.1rpm
0.1rpm
0.2rpm
Min.
20rpm
6.2rpm
4.6rpm
1.16rpm
Table Rotation Torque (kgf/m)
1500
3000
8000
50000
During max. 
vertical load tolerant center of gravity eccentricity
50
25
40
100
Tolerant welding electric current
500A
750A
Outside dimension(W×D×H)
421×530×379mm
542×747×432mm
575×750×550mm
744×993×728mm
Main Body weight
28kg
60kg
110kg
270kg
Input power source
Single Phase 100V-240V 50/60Hz
3 Phase 200V
50/60Hz
*1 Control panel internal inverter display value.
Koike Sanso Kogyo Co., Ltd.

   Unite and Challenge

Koike Sanso Kogyo Official YouTube Channel


TOPへ戻る